We are taking preorders for the 10 Bar (145psi) Cummins Map Sensor Conversion Kit capable of reading up to around 130 psi of actual boost. This will give your tuner and you the ability to view and datalog actual boost readings up to 130psi!
The kit will include installation instructions, calibration for your year model and platform, wiring harness, thread sealant tape and the sensor.
You must have custom tuning for this to work and a 1/8" Npt threaded port on your intake horn. Most all aftermarket intake horns have at least one of these ports. If you have the factory intake horn with a block off plate, you can drill and tap a 1/8" npt to mount the sensor in.
Here is the compatibility list so far.
Please verify that your vehicle year and tuning platform is listed below before ordering!
2002-2017 Smarty Touch or MM3
2007.5-2017 RaceMe Ultra
2006-2007 EFI Live
2013-2017 EFI Live
2003-2009 HP Tuners
EZ Lynk and H&S are NOT supported at this time. I'm currently working on EZ Lynk calibration.