Here is a list of all of the parts we currently offer online! Don't see what you are looking for? Message us on Shopify, Instagram, or Facebook. OR call us 866-405-4120.
12 products
12 products
12 products
10 Bar (145psi) Cummins Map Sensor Conversion Kit
Regular price $235.00We are taking preorders for the 10 Bar (145psi) Cummins Map Sensor Conversion Kit capable of reading up to around 130 psi of actual boost. This will give your tuner and you the ability to view and datalog actual boost readings up to 130psi!
The kit will include installation instructions, calibration for your year model and platform, wiring harness, thread sealant tape and the sensor.
You must have custom tuning for this to work and a 1/8" Npt threaded port on your intake horn. Most all aftermarket intake horns have at least one of these ports. If you have the factory intake horn with a block off plate, you can drill and tap a 1/8" npt to mount the sensor in.
Here is the compatibility list so far.
Please verify that your vehicle year and tuning platform is listed below before ordering!
2002-2017 Smarty Touch or MM3
2007.5-2017 RaceMe Ultra
2006-2007 EFI Live
2013-2017 EFI Live
2003-2009 HP Tuners
EZ Lynk and H&S are NOT supported at this time. I'm currently working on EZ Lynk calibration.
6.7L Cummins 63mm FMW Holset VGT Cheetah Turbocharger
Regular price $2,899.00Fleece Performance Cheetah Turbochargers set the industry standard for power, quality, and reliability. The Cheetah series does not require an expensive kit, just bolt it on and go. Designed as a stock appearing, drop in replacement turbocharger capable of much more! With our exclusive FMW compressor wheel and inconel turbine wheel technology, you’ll enjoy smooth throttle response and big top-end power. All turbos feature a new Fleece or Holset actuator.
Cheetah Turbocharger Benefits:
Airdog II-4G 165GPH Air/Fuel Separation System 2005-2018
Regular price $765.00Airdog II 100GPH Air/Fuel Separation System 2005-2018
Regular price $724.00Fleece Powerflo 750 10mm CP3
Regular price $1,895.00Exergy Performance Cummins Cp3
Regular price $1,150.005.9L Cummins 63mm FMW Holset Cheetah Turbocharger
Regular price $1,847.50Fleece Performance Cheetah Turbochargers set the industry standard for power, quality, and reliability. The Cheetah series does not require an expensive kit, just bolt it on and go. Designed as a stock appearing, drop in replacement turbocharger capable of much more! With our exclusive FMW compressor wheel and inconel turbine wheel technology, you’ll enjoy smooth throttle response, big top-end power, and that classic Cheetah Turbocharger sound.
Cheetah Turbocharger Benefits:
NOTE: For MY2004.5 trucks, you must verify proper fitment using the VIN. To do this, verify that the tenth digit of your VIN is a 5 or higher. If the tenth digit is a 4, you need to purchase FPE-351-0304.
Airdog II 165GPH Air/Fuel Separation System 1998.5-2004
Regular price $765.00Highlights
Airdog II 100GPH Air/Fuel Separation System 1998.5-2004
Regular price $724.00The patented AirDog® II-4G has been quality engineered to remove entrained air and water vapor from diesel fuel. The result is a compact, long lasting, efficient, and quiet fuel system made with superior quality.
Advancing the AirDog® Tradition with the 4th Generation Fuel System!
The AirDog® II-4G system improves engine performance by:
Benefits of the AirDog® II-4G:
Airdog II 200GPH Air/Fuel Separation System 2005-2015
Regular price $725.00Fleece CP3K Modified CP3 Pump
Regular price $1,179.00Exergy Performance 2003-2004 5.9L Cummins Injectors (Set of 6)
Regular price $3,180.00Exergy Performance Injectors
Are you at the point in your diesel build where you are looking for larger injectors? Look no further than custom injector work by Exergy Performance.
If you're looking for increased performance or fuel economy, the fuel injectors should not be overlooked. Using the best equipment in the business, Exergy will rework your existing fuel injector (depending on mileage) or start with new unit.
All injectors are calibrated on genuine Bosch equipment in actual conditions. You will receive a full analysis as well as a calibration sheet that lets you know exactly how the injector flows at idle, part throttle conditions and WOT conditions. These are not just a run of the mill aftermarket nozzle thrown on an abrasive hone machine and put in box. Exergy will go the extra step to provide the up most quality which will equate to a better, smoother and more efferent running engine.
Once the nozzles are opened up to the desired flow percentage, then the injector is reassembled and the set is balanced to within +/- 5%.