Utilizes the outer holes on the frame brackets, trimming the inner portion of the bracket is possible. Constructed out of .095 4130 Chromoly tubing and fully TIG welded using stainless filler rod, strength while being lightweight is not a concern.
Daily drivers do not worry, this piece is strong enough for everyday use.
Fitment includes: 47RE, 48RE, 68RFE and G56 transmissions. Only fits early 2013 Ram 2500/3500 with control arm front suspension, radius arm trucks please order 2013+ crossmember.
NOTE, MUST READ:
03-05 TRUCKS WILL NEED TO UPGRADE TO 06-07 48RE BRACKET AND MOUNT. P/N: 52121486AE
****Crossmembers are built to order. Please allow 3-5 business days till they ship out****
****These are made by a² Race Development and will ship from their location****
To guarantee yourself a spot on the dyno for the PSE Offroad & Diesel Performance 10 year Anniversary, please pre-register. Pre-registration is $80, and the day of is $100 if there are spots still open. Once you place the order online you will receive an email with the Dyno Release Form.
Date & Time
May 15, 2021 12-6PM
1825 Aldine Mail Route Rd
Houston TX 77039
NOTE: Please make sure your email is correct otherwise we will not be able to send you the form!!!!
Please fill this out to the best of your ability and submit it. Once the release form is received you will get a confirmation that you are all set!
Maverick Diesel 2nd Gen Transmission Shifter Mount
Do you have a 2nd gen Dodge Ram 1500/2500/3500 that you want to put a ratchet or gated shifter in but can't find a lightweight mount you like?
We got what you need! 1" chromoly tube mounts are about as light as you're going to get and keep it structurally sound.
This shifter mount bolts to the seat mount and is very rigid.
****Shifter mounts are typically built to order and will ship in 1-2 business days****
Maverick Diesel 2nd Gen Tubular Transmission Crossmember
When you get serious about racing you figure out that your trans has to come out more often than is fun. You gotta love the ups and the downs if you're going to chase success, though. We came up with a simper solution than removing and replacing the factory crossmember. It's a weight reduction mod, too. Check it out.
This crossmember is 3 pieces. 2 plates with tabs that will mount where the factory 4 bolts would go on the frame rails and then 1 tubular crossmember with trans mount stud holes.
This crossmember can be removed with no more than basic hand tools and will not require a BFH or a port-a-power to spread the frame rails to get the crossmember out.
Will fit with 47re, NV4500 and NV5600.
****Crossmembers are built to order. Please allow 2-3 business days till they ship out****